![]() ![]() If there is room later you can go for 20/40/80 MHz and Ceee or eeeC. (5180-5200-5220-5240-5260-), select Ce or eC (extra channel to the right/higher, or extra channel to the left/lower). ![]() Also select for 5 GHz but go at least 40 MHz wide. Channels must be 4 apart (20 MHz) at least and may not overlap. ![]() (You can not be connected to the scanning WLAN.)ī. Use "Scan", "Freq Usage" and even "Snooper" on WLAN1 and WLAN2. Scan the environment for other wifi signals. It's normal to use 20/40 MHz, even 20/40/80 MHz if environment (other signals) allow for free channels. 20 MHz for 5 GHz band will not give high speeds. The "auto" freq selection is NOT smart!Ĥ. With "auto" frequency you do not know what channel will be used. 20/40 MHz for 2.4 GHz is mostly impossible due to interference. What connection are you using ? Agrafena-B8 or Agrafena-A8 ?Ģ. Wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 Scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0ĭefault-client-tx-limit=0 hide-ssid=no security-profile=default compression=noġ R name="wlan2" mtu=1500 l2mtu=1600 mac-address=B8:69:F4:F8:E8:75 arp=enabled interface-type=Atheros AR9888 mode=ap-bridge ssid="Agrafena-A8" frequency=5220 band=5ghz-n/ac channel-width=20mhz secondary-channel="" scan-list=default Download rate between 2Mbit and 50MbitĠ R name="wlan1" mtu=1500 l2mtu=1600 mac-address=B8:69:F4:F8:E8:76 arp=enabled interface-type=Atheros AR9300 mode=ap-bridge ssid="Agrafena-B8" frequency=auto band=2ghz-b/g/n channel-width=20/40mhz-eC secondary-channel="" I played along with channel width and frequencies, but nothing helpsĭownload via LAN is as expected round about 100Mbit, upload via wireless connection as well. Soince a couple of weeks the wireless download rate is very bad. I'm using a Hap ac Mikrotik router in bridge mode. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |